Ground spear galvanised 51 x 51 mm, L: 600 mm

The post anchor is made of sheet metal fitted with bolt holes for attaching the post, and finally hot-dip galvanised to achieve a long lifetime. Corrosion class C3 means that it can withstand medium exposure and is therefore suitable for city- and industrial areas with moderate sulphur dioxide pollution as well as coastal areas with a low salt level.

Assembly The post anchor is driven into the ground with a tapping block made of wood or hard plastic with a heavy hammer (avoid hitting directly on the post anchor). While the anchor is driven into the ground, make sure it is completely level until the entire post anchor is flush with the ground surface. Remove the soil around the area where the post will be mounted. Then mount the post with French screws or bolts. Remember to drill pilot holes in the post before the screws are installed, if French screws are used. Finish with adding the soil back around the post.

NOTE! We recommend that the post anchor is driven into the ground so that it is flush with the ground surface. This way you ensure that the post anchor has maximal strength to withstand wind pressure for tall, massive fencing.