Ground spear galvanised 46 x 46 mm, L: 600 mm

The post anchor is made of sheet metal fitted with bolt holes for attaching the post and is hot-dip galvanised to ensure a long service life.

Corrosion class C3 means it can withstand medium exposure and is therefore suitable for city and industrial areas with moderate sulphur dioxide pollution, as well as coastal areas with a low salt level.

Assembly

The post anchor is driven into the ground using a tapping block made of wood or hard plastic and a heavy hammer.
Avoid striking directly on the post anchor.

While driving the anchor into the ground, ensure it remains completely level until the entire post anchor is flush with the ground surface.

Remove the soil around the area where the post will be mounted.

Mount the post using French screws or bolts.
If French screws are used, remember to drill pilot holes in the post before installation.

Finish by adding the soil back around the post and compact it firmly.

Note

We recommend that the post anchor is driven into the ground so it is flush with the ground surface.
This ensures maximum strength and stability, allowing the post anchor to withstand wind pressure from tall and heavy fencing.